Skip to supplier details
Back to 3D printing

Peak 3D Printing (formerly Jinxbot)

FDM printing, SLA printing, SLS Nylon 12

Mountain View / San Jose · confirm site · arranged pickup

Capabilities and materials

  • FDM 3D printing
  • SLA 3D printing
  • SLS 3D printing

Materials PLA Pro, standard resin, engineering resin, PA12 nylon

Location and handoff

599 Fairchild Dr, Mountain View, CA 94043; also 6951 Vía del Oro, San Jose, CA 95119

Peak facility/print fleet; orders may route to Mountain View or San Jose, confirm production and pickup site

Official FAQ states appointment-only in-person pickup or locker pickup; parts can route to Mountain View or San Jose, so confirm the pickup site.

Order fit

Concept validation to full batch runs and higher volumes stated; no numeric minimum/maximum.

Prototype · Production / pilot

Lead times

Standard

  • About page lists standard 48–72-hour production; FAQ clarifies typical, complexity-dependent completion with no upper-bound commitment. Pickup appointment/site and any transit are separate.

    Endpoint not specified. hours

    Clock starts: Not specified.

    Published timing source · Applies to this 3d printing listing.

Inspection

Rigorous quality checks stated without numeric tolerance or report scope.

Sources

Reviewed . Arc selected this supplier using public capability, location and order information. These are supplier-published claims, not observed tests.

  • About – Peak 3D Printing

    Official page describes joining Peak in June 2025, FDM Creality fleet, Formlabs Form 3 SLA and Formlabs Fuse 1 nylon SLS, 48–72-hour standard production and local pickup. Count Peak/Jinxbot as one supplier.

  • FAQs – Peak 3D Printing

    Formlabs Fuse1 uses Nylon 12 and build envelope 159.2 × 159.2 × 295.5 mm; FDM/SLA envelopes differ. Layer resolution is not delivered dimensional tolerance. STL recommended. FAQ clarifies typical 48–72h varies with project; local pickups strictly appointment, with parts potentially routed to Mountain View or San Jose.