Skip to content
Arc

Trescal Yateley Calibration Laboratory

Partially verified listing. The inspected UKAS 0013 schedule explicitly identifies Yateley and the bounded calibration methods below. This partial reference does not confirm the broader owner-page competencies, current instrument acceptance, commercial availability or testing scope.

TrescalYateley, Hampshire

UKAS 0013 issue 146, dated 18 August 2026, lists Trescal’s Saxony Way laboratory in Yateley as a calibration location. Its explicitly coded Yateley rows cover temperature and humidity instruments, pressure gauges, photometric quantities, electrical standards, RF instruments and equipment used for EMC testing. This reference summarises selected local calibration work. Each instrument, method and accredited report must be checked against the relevant row; customer-site activities and UKAS 4213 testing at other laboratories are separate.

Reviewed by Arc · About this review

Key facts

Exact calibration location
Schedule 0013 page 3 assigns the code Yateley to Saxony Way, Blackbushe Business Park, Yateley, Hampshire GU46 6GT and publishes a local calibration contact.
Calibration and testing are separate
Calibration schedule 0013 issue 146 is dated 18 August 2026. Testing schedule 4213 issue 022, dated 6 June 2025, allocates its dimensional testing to Pride Park, Inchinnan, Washington and Solihull, rather than Yateley.

Testing capabilities

Temperature and humidity instrument calibration

The Yateley rows describe comparison and fixed-point temperature calibration for thermometers, thermocouples, resistance thermometers and block calibrators, plus qualified radiation-thermometer work. Dew-point and relative-humidity calibration have specific chamber and temperature conditions. These are calibration methods, rather than product environmental-test limits.

Pressure and photometric calibration

Yateley-coded rows describe gas and hydraulic pressure instrument calibration consistent with EURAMET CG17, plus illuminance, luminous intensity, luminance and other photometric quantities. Row-specific conditions remain applicable; chromaticity is qualified for white light sources.

Electrical and RF instrument calibration

Yateley rows include DC/LF resistance, voltage, current, inductance and capacitance standards, frequency instruments and RF/microwave spectrum or signal analysers. Measurement configuration, connectors and uncertainty are specific to the schedule rows; the reference does not adopt a universal numerical envelope.

Calibration of EMC test equipment

The Yateley-coded rows include surge, EFT/burst, impulse magnetic field, ring-wave, voltage-dip and damped-oscillatory generator characteristics. They establish calibration of equipment used in EMC testing, rather than product EMC testing at Yateley.

Equipment and published limits

Public information not available. Contact test facility provider for more information.

Access and contact

Schedule 0013 publishes calibration.yateley@trescal.com and +44 (0)1252 533300 for the Yateley laboratory. Use this dated schedule contact to confirm the instrument, calibration row, reporting status and current arrangements.

Facility contact

Address
Saxony Way, Blackbushe Business Park
Yateley, Hampshire, GU46 6GT

Standards and accreditation

UKAS 0013 calibration scope
The current-served 0013 schedule identifies Trescal as accredited to ISO/IEC 17025:2017 and assigns the selected rows to Yateley. The issue date 18 August 2026 and row-specific conditions are preserved. Customer-premises calibrations use a separate Site code and contract review.

What to confirm with the facility

  • Only selected calibration rows explicitly labelled Yateley are summarised. The whole schedule covers multiple laboratories and customer sites; their other methods, numerical ranges and uncertainties are not transferred to Yateley.
  • Temperature chambers and humidity conditions in this calibration schedule are not general specimen environmental-test capacities. Electrical calibration in support of EMC test equipment is not evidence of product EMC testing.
  • UKAS 4213 places Yateley in its organisation header but allocates dimensional testing elsewhere. It does not establish dimensional or tensile testing at Yateley.
  • Confirm the current local contact, exact calibration row, instrument condition, uncertainty, reporting, lead time and quotation before sending equipment.

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

Public information not available. Contact test facility provider for more information.

Select only exact Yateley-coded temperature/humidity, pressure, photometric, electrical/RF and EMC-equipment calibration. No product environmental, EMC, tensile or transferred dimensional testing is inferred.

No additional facility recommendation is made. Use the further reading links to review the relevant scope.

Further reading

  • Dimensional and physical metrology

    Browse dimensional and physical metrology for physical-instrument calibration. Match the selected article, method and conditions in this exact retained task before comparing entries.

  • Review supplier compliance claims against evidence

    Confirm the exact Yateley-coded instrument-calibration method before selecting the temperature/humidity, pressure, photometric, electrical/RF or EMC-equipment calibration record. Keep product environmental, EMC, tensile and transferred dimensional testing outside the selected scope.

Sources and review

Arc inspected UKAS 0013 allocation pages 1–4 and explicitly Yateley-coded calibration rows on 13 October 2026, with issue 146 dated 18 August 2026 preserved. UKAS 4213 issue 022 dated 6 June 2025 remains separate other-site testing evidence. The revised reference uses the accreditation originals and does not depend on the independently blocked owner page.

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. Trescal UKAS 0013 calibration schedule, issue 146

    United Kingdom Accreditation Service (UKAS) · Reviewed

    Exact Saxony Way / Blackbushe Business Park / Yateley GU46 6GT laboratory code on page 3; only directly labelled Yateley calibration rows are used. Pages 1–4 establish allocation and customer-site distinctions. No owner-page competency, group numerical range, unallocated flow or 4213 testing transfer.

  2. Trescal UKAS 4213 testing schedule, issue 022

    United Kingdom Accreditation Service (UKAS) · Reviewed

    All three pages inspected: Yateley organisation header is separate from Pride Park / Inchinnan / Washington / Solihull dimensional testing allocations. No testing method assigned to Yateley.