Skip to content
Arc

UK Electronics Royton Product Testing and Inspection

UK ElectronicsRoyton, Lancashire

UK Electronics publishes Schofield House in Royton as its contact location and describes electronic manufacturing, product testing and inspection within one UK facility. Current pages support functional/electrical/end-of-line product testing and microfocus X-ray inspection, including independent customer assemblies. EMC work is described as engineering-led pre-compliance support; environmental and vibration tests are explicitly provided through a partner lab.

Reviewed by Arc · About this review

Key facts

Public information not available. Contact test facility provider for more information.

Testing capabilities

Integrated product functional and electrical tests

The product-test page describes functional power-up/input-output/signal and defined-load verification, electrical continuity/polarity/insulation-resistance/voltage-integrity tests and end-of-line verification within its manufacturing process. ICT and ATE solutions are described as conditional or integrated where required; no numerical electrical levels are supplied.

Microfocus 2D X-ray inspection of PCB assemblies

UK Electronics describes its own microfocus X-ray system and 2D digital imaging of BGA solder joints, bottom-terminated components, through-hole barrel fill, multilayer alignment, voiding and placement integrity. It explicitly offers standalone inspection of customer assemblies, including assemblies it did not manufacture.

Engineering-led EMC pre-compliance support

The EMC page describes pre-compliance investigations, prototype evaluation, design/layout reviews and practical engineering refinements within electronic product development. It distinguishes this engineering support from the formal compliance role of independent EMC laboratories. No local chamber configuration or numerical EMC scope is asserted.

Equipment and published limits

Public information not available. Contact test facility provider for more information.

Access and contact

The current contact page publishes SalesTeam@ukelectronics.co.uk, +44 (0)161 626 4117 and an enquiry form. For independent X-ray inspection, specify the assembly and hidden-joint or failure question; agree the reporting, relevant acceptance criteria and whether other testing is internal or provided through a partner.

Facility contact

Address
Schofield House, Lion Mill Yard, Fitton Street
Royton, Lancashire, OL2 5JX

Standards and accreditation

Public information not available. Contact test facility provider for more information.

What to confirm with the facility

  • The environmental page explicitly assigns temperature/humidity and vibration/shock services to a partner lab. Its printed environmental limits are not Royton facility capacities, and this guide adds no local climatic/vibration/shock category.
  • Confirm the exact assembly, method, acceptance criteria, reporting, logistics, availability and quotation directly with UK Electronics.

Before requesting a test

Public information not available. Contact test facility provider for more information.

Frequently asked questions

Public information not available. Contact test facility provider for more information.

  • Retronix

    Compare X-ray inspection of electronic assemblies or parts for the proposed article. Agree part or assembly, imaging mode, hidden feature, resolution and failure or counterfeit question.

Further reading

  • Electrical, power and batteries

    Browse electrical, power and batteries for Integrated product functional and electrical tests. Compare the documented article, method and conditions in each entry.

  • Functional and integrated-system testing

    Browse functional and integrated-system testing for Integrated product functional and electrical tests. Compare the documented article, method and conditions in each entry.

  • Review a data interface specification

    For PCB manufacturing electrical verification; defined electronic-product functional verification; X-ray inspection of electronic assemblies or parts, define the tested hardware/software, exchanged data and expected interface behaviour so the trial produces an interpretable record.

Sources and review

Arc reviewed the original sources on 2026-10-13. The cited material supports the bounded site information presented here. Test suitability and commercial arrangements require direct confirmation.

Arc publishes this directory entry and does not operate the test facility. Suggest a correction to Arc with a supporting source.

  1. UK Electronics | High-Quality Electronic Assemblies

    UK Electronics · Reviewed

    Current homepage identifies UK Electronics, own facility/manufacturing and in-house ATE/X-ray/continuity/functional/visual inspection. Product-marketing outcomes and animated zero counters are not capacities.

  2. PCB X-Ray Inspection Services | UK Electronics

    UK Electronics · Reviewed

    Current own microfocus 2D digital X-ray PCB inspection, hidden joints and standalone external customer-assembly inspection. No radiation energy, 3D CT, universal defect resolution or accreditation inferred.

  3. Contact - UK Electronics

    UK Electronics · Reviewed

    Published Schofield House Royton contact and SalesTeam mailbox/phone. OL2 6EB is separately a SatNav Lily Street instruction and does not replace the contact postcode.

  4. EMC Testing Services UK | Pre-Compliance EMC Testing

    UK Electronics · Reviewed

    Observed owner EMC link individually inspected. It describes integrated engineering/pre-compliance investigations, explicitly distinguishing formal independent EMC laboratories; no detailed local emission/immunity bands or chamber asserted.

  5. Product Testing Services UK | Electronic Validation & Production Testing

    UK Electronics · Reviewed

    Observed product-test original explicitly describes one UK manufacturing facility, functional/electrical/end-of-line testing and conditional ICT/ATE development. No numerical test levels or external customer product acceptance guarantee.

  6. Environmental Testing - UK Electronics

    UK Electronics · Reviewed

    Observed environmental original explicitly says through our partner lab. Printed chamber/vibration limits belong to that unidentified partner and are not allocated to Royton.